1. GENERAL ITEMS

Capacity  lbs [kg] 2100 [950]1 , 2500 [1134], 3000 [1360], 3500 [1588], 4000 [1814] (Passenger)
4000 [1814], 4500 [2040], 5000 [2268] (Hospital/Service)
Speed  fpm [mps] 200 [1.0], 350 [1.75], 500 [2.5]
Maximum Travel2  ft [m] 250 [75]
Maximum Stops 24
Machine Compact permanent magnet gearless with dual disc brakes
Machine Location Overhead, building supported3
Control System Fujitec Viridian
Controller Room Location Adjacent at top landing.
Remote option available (with total distance restrictions).
Control Room Size  ft-in [mm] Minimum: 6'8" x 5' [2032 x 1524] (for single car)
Roping 2:1
Car Opening Front Opening or Front and Rear Opening
Cab Height  ft-in [mm] 8' [2438] standard (9' [2743] and 10' [3048] options available)
Entrance Height  ft-in [mm] 7' [2134] standard (8' [2438] option available)

12100lbs [950kg] capacity only available as front opening with single-speed side opening (SSSO) doors.
2Travel limit will be dependent on cab weight. Please consult with your Fujitec representative.
3Hoist beams are required at top of hoistway (provided by others).

 

Passenger Elevator Dimensions

Capacity  Ibs [kg] 2100  [950]1 2500  [1134] 3000  [1360] 3500  [1588] 4000  [1814]
Speed  fpm [mps]

200  [1]     
350  [1.75]
500  [2.5] 

200  [1]     
350  [1.75]
500  [2.5] 
200  [1]     
350  [1.75]
500  [2.5] 
200  [1]     
350  [1.75]
500  [2.5] 
200  [1]     
350  [1.75]
Maximum Travel  ft [m] 250  [75]
Clear Inside Width  ft-in [mm] 5'-8"  [1727] 6'-8"  [2032] 6'-8"  [2032] 6'-8"  [2032] 7'-8"  [2337]
Clear Inside Depth  ft-in [mm]
Front Opening
Front and Rear Opening
 
4'-3"  [1295]
-
 
4'-3"  [1295]
4'-3¾"  [1314]
 
4'-9"  [1448]
4'-9¾"  [1467]
 
5'-5"  [1651]
5'-5¾"  [1670]
 
5'-5"  [1651]
5'-5¾"  [1670]
Hoistway Width2  ft-in [mm]
Front Opening
Front and Rear Opening
 
7'-4"  [2235]
-
 
8'-4"  [2540]
9'-5"  [2870]
 
8'-4"  [2540]
9'-5"  [2870]
 
8'-4"  [2540]
9'-5"  [2870]
 
9'-4"  [2845]
10'-5"  [3175]
Hoistway Depth2  ft-in [mm]
Front Opening
Front and Rear Opening
 
6'-8"  [2032]
-
 
6'-8"  [2032]
6'-7¼"  [2013]
 
7'-2"  [2184]
7'-1¼"  [2165]
 
7'-10"  [2387]
7'-9¼"  [2369]
 
7'-10"  [2387]
7'-9¼"  [2369]
Opening Width3  ft-in [mm] 3'-0"  [914]
(SSSO)
3'-6"  [1067] 3'-6"  [1067] 3'-6"  [1067] 4'-0"  [1219]
Minimum
Clear 
Overhead4,5,6  ft-in [mm]
200 [1]
350 [1.75]
500 [2.5]
15'-10"  [4826]
16'-4"  [4978]
17'-6"  [5334]
Minimum
Support 
Elevation5,6  ft-in [mm]
200 [1]
350 [1.75]
500 [2.5]
13'-1 ½"  [4001]
13'-7 ½"  [4153]
14'-9"  [4496]
Minimum
Pit Depth  ft-in [mm]
200 [1]
350 [1.75]
500 [2.5]
5'-2"  [1575]
5'-6"  [1676]
6'-7"  [2007]

12100lbs [950kg] capacity only available as front opening with single-speed side opening (SSSO) doors.
2For seismic applications add 4in [102mm] to hoistway width & 2in [51mm] to hoistway depth for front opening and 7in [178mm] to
  hoistway width for front & rear opening.
3Single-speed center opening (SSCO) & single-speed side opening (SSSO) doors available unless noted.
4Dimension is clear under hoist beam.
5For front & rear with side-opening doors, these dimensions will increase with "walk-through" side
  opening arrangement. For dimensions shown, side opening door layout must be diagonal.
6Increase dimensions for cab height greater than 8ft-0in [2438mm].
7When occupied space exists below elevator pit, consult your Fujitec representative for dimensions.
 


Hospital/Service Elevator Dimensions

Capacity  lbs [kg] 4000  [1814] 4500  [2040] 5000  [2268] 5000AIA
[2268 AIA]1
Speed  fpm [mps] 200  [1]
350  [1.75]
200  [1]
350  [1.75]
200  [1]
350  [1.75]
200  [1]
350  [1.75]
Maximum Travel  ft [m] 250  [75]
Clear Inside Width  ft-in [mm] 5'-8"  [1727] 5'-8"  [1727] 5'-8"  [1727] 5'-8"  [1727]
Clear Inside Depth  ft-in [mm] 7'-5"  [2261] 7'-11"  [2413] 8'-6"  [2591] 9'-0"  [2743]
Hoistway Width2  ft-in [mm] 8'-5"  [2565] 8'-5"  [2565] 8'-5"  [2565] 8'-5"  [2565]
Hoistway Depth  ft-in [mm]
Front Opening
Front and Rear Opening
 
9'-2"  [2794]
10'-2½"  [3112]
 
9'-8"  [2946]
10'-8½"  [3264]
 
10'-3"  [3124]
11'-3½"  [3442]
 
10'-9"  [3277]
11'-9½"  [3594]
Opening Width3  ft-in [mm] 4'-0"  [1219]
4'-6"  [1372]
4'-0"  [1219]
4'-6"  [1372]
4'-0"  [1219]
4'-6"  [1372]
4'-0"  [1219]
4'-6"  [1372]
Minimum
Clear 
Overhead4,5  ft-in [mm]
200 [1]
350 [1.75]
 
15'-10"  [4826]
16'-4"  [4978]
 
Minimum
Support 
Elevation5  ft-in [mm]
200 [1]
350 [1.75]
 
13'-1 ½"  [4001]
13'-7 ½"  [4153]
 
Minimum
Pit Depth6  ft-in [mm]
200 [1]
350 [1.75]
5'-2"  [1575]
5'-6"  [1676]

1American Institute of Architects.
2For seismic applications add 7in [178mm] to hoistway width.
3Two-speed side opening (2SSO) doors available as standard. For two-speed center opening
 (2SCO) consult your Fujitec representative for dimensions.
4Dimension is clear under hoist beam.
5Increase dimensions for cab height greater than 8ft-0in [2438mm].
6When occupied space exists below elevator pit, consult your Fujitec representative for dimensions.